AWS B2.1-1-201-1996 主要用于管道的在焊接条件下E6010(垂直向上)1/8到3/4英寸厚(M-1/P-1/S-1,1和2组)碳素钢的手工电弧焊的标准焊接工艺规程
AWS B2.1-1-201-1996 标准详情
- 标准号：AWS B2.1-1-201-1996
- 中文标题：主要用于管道的在焊接条件下E6010(垂直向上)1/8到3/4英寸厚(M-1/P-1/S-1,1和2组)碳素钢的手工电弧焊的标准焊接工艺规程
- 英文标题：standard welding procedure specification wps for shielded metal arc welding of carbon steel m-1/p-1/s-1, group 1 or 2 , 1/8 through 3/4 inch thick, e6010 vertical uphill followed by e7018 vertical uphill , as-welded condition, primarily pipe a
- 标准类别：美国焊接学会标准AWS
- 发布日期：1996-01-01
内容简介
This SWPS is to be used only as permitted by the applicable fabrication document(s) [such as code, specification, or contract document(s)]. The fabrication document(s) should specifythe engineering requirements such as design,need for heat treatment,
* 特别声明：资源收集自网络或用户上传，本网站所提供的电子文本仅供参考，请以正式出版物为准。仅供个人标准化学习，研究使用。如有侵权，请及时联系我们！
